Expert Answers about Jayco

• How To Determine Correct Rear Anti-Sway Bar For 2008 Chevy Silverado 150
• Ok, so I checked with Roadmaster and both rear anti-sway bars are potential fits for your 2008 Chevy Silverado 1500, and the correct one to fit your truck will depend on the diameter of your current OEM sway bar. These trucks came with different size anti-sway bars so what you will need to do to ensure a fit is measure your current sway bar's diameter. If it is 1" diameter (which I think is the most likely option), you will need the Roadmaster Rear Anti-Sway Bar # RM-1109-176. If you...
  view full answer...


• Will Reese Towpower Tow & Go Hitch Step Work On 2021 Toyota 4Runner
• As long as your 2021 Toyota 4Runner has a 2" trailer hitch receiver you will be able to install the Reese Towpower Tow & Go Hitch Step for Ball Mounts # RP7060200 on a ball mount of your choice. This would be a great option to help you reach roof top accessories like the fly rod carrier you mentioned. If you do not already have a ball mount I recommend taking a look at the etrailer Ball Mount Kit # 989900 which includes two ball mounts with different rise/drop, two hitch balls, two hitch...
  view full answer...


• Will the Coil SumoSprings Custom Helper Springs Fit the AWD Model of a 2015 Honda CR-V
• I spoke with our contact at SuperSprings. They have confirmed that the Coil SumoSprings Custom Helper Springs, part # CSS-1125R, will in fact fit the AWD model of the 2015 Honda CR-V. I've linked to a video review of these springs for you to look at.
  view full answer...


• Trailer Hitch Receiver With Best Clearance For 2018 Mazda 3 Hatchback
• The trailer hitch receiver that has the best bumper and ground clearance for your 2018 Mazda 3 hatchback is going to be the option from Draw-Tite: - Draw-Tite Sportframe Trailer Hitch Receiver # 24914 When we test fit this hitch on an '18 Mazda 3 hatchback we found the distance from the hitch pin hole to bumper was a mere 2-1/2 inches and the distance from top of the receiver to the ground was 11-1/4 inches. This is a Class I hitch with a 1-1/4 inch receiver, which you can use with...
  view full answer...


• Anti-Sway Bar & SumoSpring Fit For 2009 Four Winds Majestic 23A on Ford E-350 Motorhome
• With the exception of the shocks, we do have all the parts you are looking for to improve the suspension of your 2009 Four Winds Majestic 23A motorhome. Your motorhome is built on a Ford E350 chassis, and here are all the parts you asked for (also note that there are different rear anti-sway bar fits depending on if your motorhome has automatic snow tire chains or not; most don't but I did want to add the option): - WITHOUT Automatic Chains: Roadmaster Rear Anti-Sway Bar # RM-1139-117 -...
  view full answer...


• Will the Longview Towing Mirrors Obstruct the Mirror Features of a 2021 GMC Sierra 1500
• The Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side # LO54FR are designed to keep the blinker, camera and puddle light clear from obstructions and still usable; I've linked a really great video we did that shows these on a 2019 Silverado 1500 with similar features that you're referring to. You won't have any issues with these mirrors limiting your existing features though.
  view full answer...


• Truck Bed Ladder Rack That Can Carry Kayaks On A 2014 Ram 3500
• Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack would be a great option for you. Use # TH43003XT-501EX for the 6-1/2' bed without RamBox or use # TH43003XT-000EX for 8' bed. This is a very impressive system that uses three crossbars with built-in channels for accessories, and has a weight capacity of 1,250lbs. The front-most extension crossbar has a weight capacity of 1,000lbs. The two rear crossbars can slide along the bed rail to adjust for various accessories or loads. In regard...
  view full answer...


• Hitch Fit for 2016 Subaru Impreza Sedan with Aftermarket Axle Back Exhaust System
• Let me begin by saying that the hitches are designed to fit around a stock exhaust, so I can't speak to whether or not your existing aftermarket axle back exhaust would interfere. If the exhaust does interfere, a muffler shop could most likely make things work for you. For the sedan Impreza model, I'd recommend the Curt Class I hitch, part # C11408. I'll link to an install video, where you can see how the hitch fits in regard to the exhaust, which will give you an idea of if it will fit...
  view full answer...


• Trailer Wiring To Add 7-Way to 2021 Dodge Durango
• For the wiring, you can add a 7-way to your 2021 Durango, but the harness you mentioned won't fit, so you will need a couple different parts. First you'll need a 4-way for the lighting functions, and then a 7-way adapter which will give you the rest of the wiring. Exactly what you'll need is the following: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118617 - Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7 The # ETBC7 has...
  view full answer...


• Trailer Hitch Recevier For 2002 Audi A4 Wagon For Bike Rack
• There is a trailer hitch receiver option for your 2002 Audi A4 wagon, but only a 1-1/4, Class I hitch, as there were no 2 inch hitches ever made to fit this vehicle. So while you can add a hitch, it does have to be the 1-1/4 inch, Class I hitch from Curt: - Curt Trailer Hitch Receiver # 11164 I recognize this isn't exactly what you were looking for, but it is the only hitch option for your Audi, and it does also require a Class I-compatible bike rack. There are quality options for a Class...
  view full answer...


• Suspension Enhancement Option For 2020 Chevy Express 4500 Cutaway Motorhome
• We do have an option for suspension enhancement for your motorhome on a 2020 Chevy Express 4500 cutaway chassis, but the SuperSprings SSA245-2 won't fit since you do not have the top overload spring, as they are designed to install on top of the spring. So instead, I recommend another option, which are SumoSprings, with the correct fit for your RV being the following: - Rear Axe: SumoSprings Solo Custom Helper Springs # SSR-206-54 - Front Axle: SumoSprings Solo Custom Helper Springs #...
  view full answer...


• Load Range D ST205/75R14 Trailer Tire With Galvanized Steel Wheel & 5 on 4-1/2 Bolt Pattern
• We do have a solution for you, though the Loadstar ST205/75D14 Bias Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C # AM3S450 is not available in a load range D because ST205/75-14 bias tires only go up to load range D. So what you can use instead is a load range D ST205/75-14 radial tire and that same wheel, though you would need to get them separate and have them mounted. Radial tires are definitely the better option for normal road use, because the side-to-side cords...
  view full answer...


• Towing Mirrors For 2021 GMC Yukon
• As of now there are no custom-fit towing mirrors for a 2021 GMC Yukon, so the best option is going to be universal towing mirrors from K-Source: - K-Source Universal Towing Mirrors # KS3891-2 These use an adjustable ratcheting system and fit mirrors that are from 4-1/2" to 11-1/2" tall. They have a large 7-3/4" tall x 5-1/8" wide mirror face so you get an optimal view behind you and their aforementioned ratcheting straps help ensure there is little vibration as you tow. I have added...
  view full answer...


• Will the Curt Cargo Basket Work with the Malone AirFlow2
• The Malone AirFlow2, part # MPG216, and the Curt Cargo Basket, part # C18115-117, are a great combination for your 2013 Lexus RX 350. The 3" limit will not be an issue as the Curt Cargo Basket is perfectly capable clamping around the AirFlow2.
  view full answer...


• Will The Solera Awnbrella Support Kit Item # LC362239 For 10' Awnings Work With An 8' Awning
• The Solera Awnbrella Support Kit for 10' Projection RV Awning - 3 Pack Item # LC362239 will work with an 8' awning however; because the arms will not be extended as far as they would be with a 10' awning, I don't believe you are going to have as much support. I recommend the Solera Awnbrella Support Kit for 8' Projection RV Awning - 3 Pack Item # LC362237. This kit is designed for 8' awnings to provide the best support for that size canopy and works with awning widths from 14' to 18'.
  view full answer...


• Universal Weld-On 2-1/2 Inch Trailer Hitch Receiver For 34 Inch Truck Frame
• We have an option for you, but the Curt Trailer Hitch Receiver # C15800 measures just under 34 inches wide from outside to outside and is a custom-fit option for 2001 - 2021 Chevy/GMC 3500 Cab & Chassis, as well as 2010 - 2021 Ram 3500, 4500, 5500 Cab & Chassis. So it will fit those trucks but otherwise I can't guarantee any fit. What you can use though, is a universal weld-on option, which will fit your 34 inch wide frame: - Curt Class 5 Universal Weld-on Hitch with Brackets - 2-1/2"...
  view full answer...


• Will a Curt 13575 Hitch Fit on a 2018 Toyota RAV4
• I may have a solution for you, but typically custom fit hitches are not going to be able to be transferred between vehicles made by different manufacturers. For this reason, the Curt # C13575 will not fit on a 2018 Toyota RAV4. However, a nice hitch that won't break the bank and will fit on your 2018 Toyota RAV4 is the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98864. This hitch is custom fit for a 2018 RAV4 and will give you a similar Class III...
  view full answer...


• Will the Firestone Ride-Rite Systems Work on a 2007 Nissan Titan with 6 Inch Lift
• In order to use the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2355 on a 2007 Nissan Titan with a 6" lift you'll need to add some lift spacers to the bags. Typically for a 6" lift you'll need the Lift Spacers for Firestone Ride-Rite Air Helper Springs - 6" Spacers - Qty 2 # F2374, but you'll want to confirm that the distance between where the upper and lower brackets mount the frame is between 11.5" and 12.5". If you've got a different distance between the...
  view full answer...


• Mounting Plate For 2016 Yamaha Grizzly 700 EPS For Superwinch Terra ATV Winch
• There is a specific winch mount that is a custom fit for your 2016 Yamaha Grizzly 700 EPS that will allow you to mount the Superwinch Terra Series ATV Winch 1125220. What you will need is the Bulldog WInch Custom-Fit Steel ATV Winch Mount # BDW15185. This will give you a very easy way to mount the winch directly on your Grizzly.
  view full answer...


• Can The Rhino-Rack Cargo Bag RRLB250 Be Mounted Sideways Instead Of Longways?
• The Rhino-Rack Rooftop Cargo Bag - Waterproof - 8.5 cu ft - 43" x 31-1/2" x 11-1/2" # RRLB250 can certainly be mounted sideways instead of longways since it has 2 straps on each side of the bag. You just need to make sure it is fastened tightly against the roof or roof basket that you are mounting it to. I have included a demonstration video that goes into more detail.
  view full answer...